News RSS

Droop guage, ride height gauge -

Down Stop Method In order to have a balanced car left and right, suspension heights should be equal. Setting your down stops equal between sides is important in setting up your car. In order to measure the down stop adjustment of your car, you will need to place your car onto the support blocks at the lower level (6mm) on a flat level surface with the wheels off. Make sure the car sites flush on the support blocks. Slide the droop gauge underneath the lower arm until it touches the outside edge of the lower suspension arm. Use the numbers on the top of the gauge to determine the...

Read more

The Definitive Guide to Mini-Z / 1:28th scale Differentials The stock gear differential that comes with most Mini-Z offerings from Kyosho has a lot of friction and play making handling difficult and unpredictable. Upgrading to an adjustable ball bearing differential, an adjustable metal gear differential or a clutch-type gear differential will provide a smoother throttle response  and a much more stable rear end compared to the stock gear differentials from  Kyosho. After tires, your differential is the second most important aspect of your car's handling so choosing the correct one needs some consideration. All differentials have pros and cons; some...

Read more